Radio Speaker Amplifier Replacement Bravada, Envoy, TrailBlazer
Removal Procedure
- Remove the upper right quarter trim panel. Refer to
Rear Quarter Upper Trim Panel Replacement
in
Interior Trim.
- Remove the lower right quarter trim panel. Refer to
Rear Quarter Trim Panel Replacement - Right Side
in
Interior Trim.
- Disconnect the electrical
connectors from the radio speaker amplifier.
- Remove the 4 bolts that retain the radio speaker amplifier
to the body.
- Remove the radio speaker amplifier from the body.
Installation Procedure
- Install the radio speaker
amplifier to the body.
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the 4 bolts
that retain the radio speaker amplifier to the body.
Tighten
Tighten the bolts to 10 N·m (88 lb in).
- Connect the electrical connectors to the radio speaker amplifier.
- Install the lower right quarter trim panel. Refer to
Rear Quarter Trim Panel Replacement - Right Side
in
Interior Trim.
- Install the upper right quarter trim panel. Refer to
Rear Quarter Upper Trim Panel Replacement
in
Interior Trim.
Radio Speaker Amplifier Replacement Envoy XL
Removal Procedure
- Remove the Left rear quarter trim panel. Refer to
Rear Quarter Trim Panel Replacement - Left Side
.
- Disconnect the electrical connectors from the radio speaker amplifier.
- Remove the 4 bolts that retain the radio speaker amplifier to the body.
- Remove the radio speaker amplifier from the body.
Installation Procedure
- Install the radio speaker amplifier to the body.
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the 4 bolts that retain the radio speaker amplifier to the body.
Tighten
Tighten the bolts to 10 N·m (88 lb in).
- Connect the electrical connectors to the radio speaker amplifier.
- Install the left rear quarter trim panel. Refer to
Rear Quarter Trim Panel Replacement - Left Side
.