8 Digit GM Part Number: The scan tool displays the part number
of the module.
Balance: The scan tool displays -50 to +50. The Balance
between the right and left audio output.
Bass: The scan tool displays 0-100%. The percentage of
bass selected at the radio.
Battery Voltage: The scan tool displays 0-18 Volts. The
Voltage measured from the radio or amplifier's ignition positive voltage circuit
to ground.
Cal. Module 1 Part No.: The scan tool displays the part number
of the modules software.
Cal. Module 1 Suffix: The scan tool displays the suffix of the
modules software.
Chime Volume: The scan tool displays 0-100%. The percentage
at which the chime volume has been calibrated to.
Fade: The scan tool displays -50 to +50. The Fade between
the front and rear audio output.
Ignition Since Current DTC: The scan tool displays 0-225
Cycles. The number of ignition cycles since a current DTC was set.
Midrange: The scan tool displays 0-100%. The percentage
of midrange selected at the radio.
Operational S/W Part No: The scan tool displays the part number
of the modules software.
Operational S/W Suffix: The scan tool displays the suffix of
the modules software.
Signal Strength: The scan tool displays 0-225 dB. The
signal strength of the radio frequency.
Treble: The scan tool displays 0-100%. The percentage
of treble selected at the radio.
Volume: The scan tool displays 0-100%. The percentage
of volume selected at the radio.