Caution: If a window is cracked but still intact, crisscross the window with
masking tape in order to reduce the risk of damage or personal injury.
Important: Before cutting out a stationary window, apply a double layer of masking tape
around the perimeter of the painted surfaces and the interior trim.
- Open the liftgate.
- Remove the upper quarter trim. Refer to
Rear Quarter Upper Trim Panel Replacement
in Interior Trim.
Caution: When working with any type of glass or sheet metal with exposed or rough
edges, wear approved safety glasses and gloves in order to reduce
the chance of personal injury.
Important: Keep the cutting edge of the tool against the window. Do this from inside the
vehicle.
- This will allow the urethane adhesive to be separated from the window.
| • | Leave a base of urethane on the pinchweld flange. |
| • | The only suitable lubrication is clear water. |
| • | UseJ 39032
or equivalent in order
to remove the window. |
- If the original reveal molding on the quarter window is damaged it must
be replaced.
- With the aid of an assistant, remove the quarter
window from the opening.
