Removal Procedure
- Remove the sunroof window. Refer to
Sunroof Window Replacement
.
- Remove the screws (1) that retain
the water trough to the sunroof assembly.
- Remove the water trough from the sunroof assembly from the top of the
vehicle.
Important: The sunshade must be removed from the top of the vehicle.
- Slide the sunshade forward.
- Flex the center of the sunshade (2)
upward while simultaneously sliding the panel sideways to release the retaining tabs (3)
from the track slot (1).
- Remove the sunshade from the top of the vehicle.
Installation Procedure
- Position the sunshade to the vehicle from
the top of the vehicle.
- Install the retaining tabs on one side of the sunshade into the track
slot of the sunroof.
- Flex the center of the sunshade (2) upwards while simultaneously
inserting the retaining tabs (3) into the track slot (1).
- Ensure that the sunshade tabs are fully seated in the track slots, and
the sunshade slides smoothly.
- Install the water trough to the sunroof
from the top of the vehicle.
Notice: Refer to Fastener Notice in the Preface section.
- Install the screws (1) that retain the water trough to the sunroof.
Tighten
Tighten the screws to 1 N·m (9 lb in).
- Install the sunroof window. Refer to
Sunroof Window Replacement
.