Removal Procedure
- Remove the moveable roof panel. Refer to
Moveable Roof Panel Assembly Replacement
.
- Remove the moveable roof panel actuator cover. Refer to
Moveable Roof Panel Actuator Cover Replacement
.
- Depress the retainer (1) on the moveable
roof panel control module.
- Slide the control module towards the motor/actuator assembly to remove
the module from the keyhole slots.
- Disconnect the electrical connectors from the moveable roof panel control
module.
- Remove the module from the vehicle.
Installation Procedure
- Install the tabs located on the bottom of the control
module into the keyhole slots of the moveable roof panel assembly.
- Slide the control module away from the motor/actuator assembly, ensuring
the tabs on the bottom of the control module remain in the keyhole slots.
- Slide the control module away from the motor/actuator assembly until the
retainer (1) is fully engaged.
- Connect the electrical connectors (2) to the control module.
- Install the moveable roof panel actuator cover. Refer to
Moveable Roof Panel Actuator Cover Replacement
.
- Install the moveable roof panel. Refer to
Moveable Roof Panel Assembly Replacement
.
- Perform a moveable roof panel learn cycle, by depressing the holding the
roof switch in the forward position until the roof panel is fully opened, then depressing
and holding the roof switch in the rearward position until the roof panel is fully
closed.
- Ensure the proper operation of the moveable roof panel and end gate window.