Removal Procedure
Caution: In order to reduce the risk of fire and personal injury observe the
following items:
• Replace all nylon fuel pipes that are nicked, scratched or damaged
during installation, do not attempt to repair the sections of the nylon fuel
pipes • Do not hammer directly on the fuel harness body clips when installing
new fuel pipes. Damage to the nylon pipes may result in a fuel leak. • Always cover nylon vapor pipes with a wet towel before using a
torch near them. Also, never expose the vehicle to temperatures higher than
115°C (239°F) for more than one hour, or more than 90°C (194°F)
for any extended period. • Apply a few drops of clean engine oil to the male pipe ends before
connecting fuel pipe fittings. This will ensure proper reconnection and prevent
a possible fuel leak. (During normal operation, the O-rings located in the
female connector will swell and may prevent proper reconnection if not lubricated.)
Notice: Clean all of the following areas before performing any disconnections
in order to avoid possible contamination in the system:
• The fuel pipe connections • The hose connections • The areas surrounding the connections
- Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
- Disconnect the EVAP canister purge pipe (1) from the EVAP canister and the fuel tank.
- Disconnect the EVAP canister fresh air pipe (2) from the EVAP canister and the fuel tank.
- Disconnect the EVAP canister vent solenoid valve pipe (3) from the EVAP canister and the vent solenoid valve.
- Remove the pipes from the pipe retainer.
Important: Before disconnecting or reconnecting evaporative emission (EVAP) pipes. Refer to Plastic Collar Quick Connect Fitting Service .
Installation Procedure
- Install the pipes to the pipe retainer.
- Connect the EVAP canister vent solenoid valve pipe (3) to the EVAP canister and the vent solenoid valve.
- Connect the EVAP canister fresh air pipe (2) to the EVAP canister and the fuel tank.
- Disconnect the EVAP canister purge pipe (1) from the EVAP canister and the fuel tank.
- Lower the vehicle.
