Removal Procedure
- Raise the vehicle. Refer to
Lifting and Jacking the Vehicle
.
- Disconnect the harness connector (2) from the evaporative
emission (EVAP) canister vent valve.
- Disconnect the EVAP vent pipe (3) from the EVAP canister vent valve (1).
- Disengage the bracket retaining tab (2) and remove the EVAP canister vent valve.
Installation Procedure
- Install the EVAP canister vent valve (1) on the bracket (2).
- Inspect for proper retention of the EVAP vent valve (1) on the bracket (2).
- Connect the EVAP vent pipe (3) to the EVAP canister vent valve (1).
- Connect the harness connector (2) to the EVAP canister
vent valve.
- Lower the vehicle.