Input Shaft Thrust Bearing Replacement. GMC Truck Envoy

For 1990-2009 cars only

Makes 🢒 GMC_Truck 🢒 2007 🢒 Envoy - 2WD 🢒 Transmission/Transaxle 🢒 Transfer Case - NVG 120-NR9 🢒 Input Shaft Thrust Bearing Replacement

Callout

Component Name

Transfer Case Input Gear Thrust Bearing

Tip

•	Using a suitable adapter and an arbor press, remove the input gear thrust bearing by going through the front of the input gear.

•	A suitable adapter is required to use with the J 8092 .

•	Press the bearing to the bottom.

J 8092 Driver Handle

Transfer Case Input Shaft Bore Seal

Tip
Press the seal 20.8 mm (0.819 in) (a) deep into the seal/bearing bore.