GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  2. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
  3. Remove the door latch assembly. Refer to Rear Side Door Latch Replacement .

  4. Object Number: 739852  Size: SH
  5. Remove the 2 screws that retain the actuator (1) to the lock.

  6. Object Number: 747835  Size: SH
  7. Simultaneously lift up on and rotate the actuator away from the latch in order to disengage the rubber bumper (1) from the latch.
  8. Remove the actuator from the latch.

Installation Procedure


    Object Number: 747835  Size: SH
  1. Install the rubber bumper (1) to the latch.
  2. Rotate the actuator toward the latch in order to fully engage the rubber bumper into the latch.
  3. Important: Ensure that the first tooth of the gear on the actuator and the first tooth of the gear on the latch align and interlock properly.


    Object Number: 747836  Size: SH
  4. Install the actuator to the top of the latch.
  5. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 739852  Size: SH
  6. Install the 2 screws that retain the actuator (1) to the lock.
  7. Tighten
    Tighten the screws to 0.75 N·m (6 lb in).

  8. Install the lock to the door. Refer to Rear Side Door Latch Replacement .
  9. Install the water deflector. Refer to Rear Side Door Water Deflector Replacement .
  10. Install the door trim panel. Refer to Rear Side Door Trim Panel Replacement .