GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2007 🢒 Envoy - 2WD 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Assist Handle Replacement

Removal Procedure

    Object Number: 1456180 Size: SH
  1. Open the covers (1) on the assist handle base to reveal the retaining screws (2).
  2. Remove the 2 screws (2) that retain the assist handle to the roof panel.
  3. Remove the assist handle.

Installation Procedure

    Object Number: 1456180 Size: SH
  1. Position the assist handle to the headliner.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the 2 fasteners (2) in order to retain the assist handle to the roof panel.

    3. Tighten
    Tighten the 2 screws to 2 N·m (18 lb in).

  3. Close the covers (1) on the assist handle base.