Application | Specifications | |
---|---|---|
Metric | English | |
3-Phase Cable Bracket Nut | 15 N·m | 11 lb ft |
3-Phase Cable to Starter/Generator Control Module (SGCM) Nut | 9 N·m | 80 lb in |
Accelerator Pedal Bolt | 9 N·m | 80 lb in |
Air Cleaner Outlet Duct Clamp | 4 N·m | 35 lb in |
Auxiliary Heater Water Pump Bracket Bolt | 15 N·m | 11 lb ft |
Brake Pipe Fittings to Electronic Brake Control Module (EBCM) | 25 N·m | 18 lb ft |
Camshaft Position (CMP) Sensor Bolt | 29 N·m | 21 lb ft |
Canister Vent Solenoid (CVS) Bracket Bolt | 12 N·m | 106 lb in |
Crankshaft Position (CKP) Sensor Bolt | 25 N·m | 18 lb ft |
Electro-Hydraulic Control Unit (EHCU) Bolts | 25 N·m | 18 lb ft |
Engine Coolant Temperature (ECT) Sensor | 20 N·m | 15 lb ft |
Engine Wiring Harness Bracket Nut | 5 N·m | 44 lb in |
EVAP Canister Bolt/Nut | 25 N·m | 18 lb ft |
EVAP Canister Bracket Nut | 25 N·m | 18 lb ft |
EVAP Canister Purge Solenoid Bolt | 10.5 N·m | 93 lb in |
EVAP Vent Valve Bracket Bolt | 12 N·m | 106 lb in |
Fuel Composition Sensor Nut | 17 N·m | 13 lb ft |
Fuel Composition Sensor to Bracket Bolt | 10 N·m | 89 lb in |
Fuel Feed and EVAP Pipe Assembly Nut | 12 N·m | 106 lb in |
Fuel Line Fitting | 25 N·m | 18 lb ft |
Fuel Pipe Bracket Nut | 10 N·m | 89 lb in |
Fuel Rail Bolts | 10 N·m | 89 lb in |
Fuel Tank Fill Pipe Clamp | 2.5 N·m | 22 lb in |
Fuel Tank Filler Housing to Body Screw | 2.3 N·m | 20 lb in |
Fuel Tank Filler Pipe Housing to Fuel Tank Fill Pipe Screw | 2.3 N·m | 20 lb in |
Fuel Tank Ground Strap Bolt | 9 N·m | 80 lb in |
Fuel Tank Shield Bolt | 18 N·m | 13 lb ft |
Fuel Tank Strap Bolt | 40 N·m | 30 lb ft |
Heated Oxygen Sensor (HO2S) | 42 N·m | 31 lb ft |
Ignition Coil Bolt | 8 N·m | 71 lb in |
Knock Sensor | 20 N·m | 15 lb ft |
Mass Air Flow/Intake Air Temperature (MAF/IAT) Sensor Clamp | 7 N·m | 62 lb in |
Powertrain Control Module (PCM) Electrical Connector Bolt | 8 N·m | 71 lb in |
Rear Fuel Line Bundle Nut | 12 N·m | 106 lb in |
Spark Plug | ||
| 20 N·m | 15 lb ft |
| 15 N·m | 11 lb ft |
Starter/Generator Control Module (SGCM) Cover Bolt | 9 N·m | 80 lb in |
Throttle Actuator Control (TAC) Module Nut | 9 N·m | 80 lb in |
Throttle Body Nut | 10 N·m | 89 lb in |