For 1990-2009 cars only
Removal Procedure
- Remove the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement .
- Disconnect the electrical connector from the secondary air injection (AIR) reaction solenoid valve.
- Disconnect the AIR pump air outlet pipe from the AIR solenoid valve.
- Remove the nut (1) securing the transmission fluid level indicator tube (2) to the AIR solenoid valve.
- Remove the transmission fluid level indicator tube (2) from the AIR solenoid valve stud (3).
- Remove the 2 AIR solenoid valve studs (3).
- Remove the AIR solenoid valve (4) and the gasket (5) from the engine.
Installation Procedure
- Install the AIR solenoid valve (4) and the gasket (5) to the engine.
- Install the 2 AIR solenoid valve studs (3).
- Install the transmission fluid level indicator tube (2) to the AIR solenoid valve stud (3).
- Install the nut (1) securing the transmission fluid level indicator tube (2) to the AIR solenoid valve.
- Connect the AIR pump air outlet pipe to the AIR solenoid valve.
- Connect the electrical connector to the AIR solenoid valve.
- Install the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement .
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the studs to 25 N·m (18 lb ft).
Tighten
Tighten the nut to 10 N·m (89 lb in).
