GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
GMC_Truck
🢒
2008
🢒
Envoy - 2WD
🢒
Diagnostic Navigation
🢒
Vehicle Diagnostic Information
🢒 Power Seat Switch Replacement
Removal Procedure
Remove the switch bezel assembly from the seat assembly. Refer to
Driver Seat and Passenger Seat Adjuster Switch Bezel Replacement
.
Remove the buttons from the switch.
Release the tabs that retain the seat switch to the seat bezel assembly.
Disconnect the electrical connector from the switch.
Remove the seat switch from the seat bezel assembly.
Installation Procedure
Connect the electrical connector to the switch.
Install the seat switch to the seat bezel assembly. Verify that the retaining tabs are fully seated.
Install the buttons on the switch.
Install the switch bezel assembly to the seat assembly. Refer to
Driver Seat and Passenger Seat Adjuster Switch Bezel Replacement
.