Removal Procedure
- Raise the vehicle. Refer to
Lifting and Jacking the Vehicle
.
Important: Make note of the routing in order to aid in reassembly.
- Remove the vent hose from the top of the differential carrier assembly.
- Remove the vent hose from the clip on the engine wiring harness bracket.
- Remove the vent hose.
Installation Procedure
- Install the vent hose to the differential carrier assembly.
• | Route the same way as when removed. |
• | Ensure that the hose is free of kinks and is routed clear of sharp objects. |
• | Ensure that the vent is not plugged. |
- Install the vent hose in the clip on the engine wiring harness bracket.
- Lower the vehicle.