GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2008 🢒 Envoy - 2WD 🢒 Body Systems 🢒 Vehicle Access 🢒 Liftgate Lock Striker Replacement

Removal Procedure

    Object Number: 721393 Size: SH
  1. Open the liftgate.
  2. Using a grease pencil, mark the position of the liftgate striker to the body.
  3. Remove the bolts that retain the liftgate striker to the body.
  4. Remove the striker from the body.

Installation Procedure

    Object Number: 721393 Size: SH
  1. Install the striker to the body and position as previously marked.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the bolts that retain the striker to the body.

    3. Tighten
    Tighten the bolts to 25 N·m (18 lb ft).

  3. Adjust the striker, if necessary.
  4. Close the liftgate.