Removal Procedure
- Remove the washer solvent container. Refer to
Windshield Washer Solvent Container Replacement
.
- Disconnect the washer hose (4) from the pump (5).
- Remove the pump (5) from the solvent container by carefully pulling pump
from the retainer (1).
- Remove the pump from the sealing grommet (3) by pulling the pump
upwards.
- Discard the grommet.
Installation Procedure
- Install a new sealing grommet into the container. Lubricate the grommet
with clean washer solvent.
- Install the pump (5) to the sealing grommet (3).
- Install the pump (5) to the retainer (1) on the solvent
container.
- Connect the washer hose (4) to the pump (5).
- Install the washer solvent container. Refer to
Windshield Washer Solvent Container Replacement
.