GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2008 🢒 Envoy - 2WD 🢒 Driver Information and Entertainment 🢒 Cellular, Entertainment, and Navigation 🢒 Video Player Bracket Replacement

Removal Procedure
  1. Remove the video display assembly. Refer to Video Display Replacement .

    2. Object Number: 792148 Size: SH
  2. Remove the two rear overhead console carrier screws (1).

    3. Object Number: 778730 Size: SH
  3. Remove the front bracket retaining bolts.

    4. Object Number: 792151 Size: SH
  4. Carefully pull down on the rearward edge of the headliner in order to expose the rear bracket retaining bolt.
  5. Remove the rear retaining bolt.
  6. Carefully remove the bracket from the vehicle through the headliner opening.

Installation Procedure

    Object Number: 792150 Size: SH
  1. Carefully install the bracket to the vehicle through the headliner opening, ensuring the locating tabs (1) are fully seated to the roof bow.

    2. Object Number: 778730 Size: SH
  2. Partially install the front bracket retaining bolts.

    3. Object Number: 792151 Size: SH
  3. Carefully pull down on the rearward edge of the headliner in order to expose the rear bolt installation area.
  4. Partially install the rear bracket retaining bolt.

    5. Notice: Refer to Fastener Notice in the Preface section.

  5. Fully seat the retaining bolts.

    6. Tighten
    Tighten the bolts to 10 N·m (88 lb in).


    Object Number: 792148 Size: SH
  6. Install the two rear overhead console carrier screws (1).

    7. Tighten
    Tighten the screws to 1.2 N·m (10 lb in).

  7. Install the video display assembly. Refer to Video Display Replacement .
  8. Verify the video display for proper operation.
  9. Close the video display screen.
  10. Install the bolt cover bezel.