GM Service Manual Online
For 1990-2009 cars only

Liftgate Emblem/Nameplate Replacement Isuzu


Object Number: 1649356  Size: MF

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

Rear Liftgate Name Plate Assembly (ISUZU)

Tip

  1. Use a J 25070 Heat Gun-500-750F or equivalent to remove the old nameplate. Clean all adhesive from rear liftgate, wipe surface dry with a clean lint-free towel prior to installing new nameplate.
  2. When removing protective liners from adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
  3. Close the liftgate lid.
  4. Ensure full adhesion of the nameplate to the liftgate is made.

2

Rear Liftgate Name Plate Assembly (ASCENDER)

Tip

  1. Use a J 25070 or equivalent to remove the old nameplate. Clean all adhesive from rear liftgate, wipe surface dry with a clean lint-free towel prior to installing new nameplate.
  2. When removing protective liners from adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
  3. Close the rear liftgate.
  4. Ensure full adhesion of the nameplate to the liftgate is made.

3

Rear Liftgate Emblem (LIMITED)

Tip

  1. Use a J 25070 or equivalent to remove the old emblem. Clean all adhesive from rear liftgate, wipe surface dry with a clean lint-free towel prior to installing new emblem.
  2. When removing protective liners from adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
  3. Close the liftgate lid.
  4. Ensure full adhesion of the emblem to the liftgate is made.

4

Rear Liftgate Emblem (LS)

Tip

  1. Use a J 25070 or equivalent to remove the old emblem. Clean all adhesive from rear liftgate, wipe surface dry with a clean lint-free towel prior to installing new emblem.
  2. When removing protective liners from adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
  3. Close the liftgate lid.
  4. Ensure full adhesion of the emblem to the liftgate is made.

Liftgate Emblem/Nameplate Replacement TrailBlazer LTZ


Object Number: 1649353  Size: SF

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

Rear Liftgate Name Plate Assembly (TrailBlazer)

Tip

  1. Use a J 25070 Heat Gun-500-750F or equivalent to remove the old nameplate. Clean all adhesive from rear liftgate, wipe surface dry with a clean lint-free towel prior to installing new nameplate.
  2. When removing protective liners from the adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
  3. Close the liftgate lid.
  4. Ensure full adhesion of the nameplate to the liftgate is made.

2

Rear Liftgate Emblem Assembly (LTZ)

Tip

  1. Use a J 25070 or equivalent to remove the old emblem. Clean all adhesive from rear liftgate, wipe surface dry with a clean lint-free towel prior to installing new emblem.
  2. When removing protective liners from adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
  3. Close the rear liftgate.
  4. Ensure full adhesion of the emblem to the liftgate is made.

3

Rear Liftgate Nameplate Assembly (CHEVROLET)

Tip

  1. Use a J 25070 or equivalent to remove the old nameplate. Clean all adhesive from rear liftgate, wipe surface dry with a clean lint-free towel prior to installing new emblem.
  2. When removing protective liners from adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
  3. Close the liftgate lid.
  4. Ensure full adhesion of the nameplate to the liftgate is made.

Liftgate Emblem/Nameplate Replacement TrailBlazer SS


Object Number: 1649361  Size: SF

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

Rear Compartment Lid Name Plate (TrailBlazer)

Tip

  1. Use heat gun to remove old nameplate. Clean all adhesive from rear compartment lid, wipe surface dry with a clean lint-free towel prior to installing new nameplate.
  2. When removing protective liners from adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
  3. Close the rear compartment lid prior to installing the new nameplate.
  4. Ensure full adhesion of the nameplate is made to the liftgate.

2

Rear Compartment Lid Emblem (SS)

Tip

  1. Use heat gun to remove the old emblem. Clean all adhesive from rear compartment lid, wipe surface dry with a clean lint-free towel prior to installing new emblem.
  2. When removing protective liners from adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
  3. Close the rear compartment lid prior to installing the new nameplate.
  4. Ensure full adhesion of the emblem is made to the liftgate.

Liftgate Emblem/Nameplate Replacement GMC


Object Number: 2028491  Size: SF

Callout

Component Name

Special Tools

J 25070 Heat Gun - 500-750°F

1

Rear Liftgate Name Plate Assembly (GMC)

Procedure

  1. Use a J 25070 or equivalent to remove the old nameplate. Clean all adhesive from rear liftgate, wipe surface dry with a clean lint-free towel prior to installing new nameplate.
  2. When removing protective liners from adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
  3. Close the liftgate lid.
  4. Ensure full adhesion of the nameplate to the liftgate is made.

2

Rear Liftgate Name Plate Assembly (ENVOY)

Procedure

  1. Use a J 25070 or equivalent to remove the old nameplate. Clean all adhesive from rear liftgate, wipe surface dry with a clean lint-free towel prior to installing new nameplate.
  2. When removing protective liners from adhesive tape, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
  3. Close the rear liftgate.
  4. Ensure full adhesion of the nameplate to the liftgate is made.