GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2008 🢒 Envoy - 2WD 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Pressure Relief Valve Replacement

Removal Procedure

    Object Number: 797209 Size: SH
  1. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .
  2. Using a small flat-bladed tool, apply pressure at 2 upper locations and 2 lower locations to release the retainers on the pressure relief valve.
  3. Remove the pressure relief valve from the lower quarter panel.

Installation Procedure

    Object Number: 797209 Size: SH
  1. Install the pressure relief valve to the lower quarter panel.
  2. Press the pressure relief valve into the quarter lower panel until the retainers lock into place at the upper and lower locations.
  3. Install the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .