GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2008 🢒 Envoy - 2WD 🢒 Safety and Security 🢒 Seat Belts 🢒 Driver or Passenger Seat Belt Buckle Replacement

Removal Procedure
  1. Remove the front seat assembly. Refer to Front Seat Replacement - Bucket .

    2. Object Number: 752865 Size: SH
  2. Disconnect the seat belt reminder wiring harness (3) on the driver seat.

    3. Object Number: 755837 Size: SH
  3. Remove the nut (1) which retains the seat belt buckle to the seat assembly.
  4. Remove the seat belt buckle from the seat assembly.

Installation Procedure

    Object Number: 755837 Size: SH
  1. Install the seat belt buckle to the seat assembly.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the nut (1) which retains the seat belt buckle to the seat assembly.

    3. Tighten
    Tighten the front seat belt buckle nut to 52 N·m (38 lb ft).


    Object Number: 752865 Size: SH
  3. Connect the seat belt reminder wiring harness (3) on the driver seat.
  4. Install the front seat assembly. Refer to Front Seat Replacement - Bucket .