Removal Procedure
- Disable the SIR system. Refer to
SIR Disabling and Enabling .
- Remove the head restraints from the front seats. Refer to
Front Seat Head Restraint Replacement.
- Lower the headliner. Refer to
Headlining Trim Panel Replacement .
- Disconnect the roof rail air bag electrical connector (1).
- Remove the forward tether bolt (3).
- Remove the clips (3) from the pillar.
- Remove the 3 bolts retaining the rear curtain
to the roof.
- Remove the bolt retaining the bracket to the roof.
- Remove the forward curtain clip (2).
- Remove the 3 bolts (1, 3) retaining the air bag module to
the roof.
- Remove the roof rail air bag from the vehicle.
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Install the 3 bolts (1, 3) retaining the roof rail air bag module
to the roof.
Tighten
Tighten the roof rail air bag module bolts to 9 N·m
(79 lb in).
- Install the forward curtain clip (2).
- Install the bolt retaining the bracket to the roof.
- Install the 3 bolts retaining the rear curtain
to the roof.
Tighten
Tighten the roof rail air bag curtain bolts to 9 N·m
(79 lb in).
- Install the clips (3) to the pillar.
- Install the roof rail air bag forward tether bolt (3).
Tighten
Tighten the roof rail air bag forward tether bolt
to 9 N·m (79 lb in).
- Connect the roof rail air bag electrical connector (1).
- Install the headliner. Refer to
Headlining Trim Panel Replacement .
- Enable the SIR system. Refer to
SIR Disabling and Enabling .
- Install the head restraints from the front seats. Refer to
Front Seat Head Restraint Replacement .