Did you perform the DRL System Check?

--

Go to Step 2

Go to Daytime Running Lights (DRL) System Check

Use the scan tool in order to read the current body control module (BCM) diagnostic trouble codes (DTCs).

Does the scan tool show any DTCs??

--

Go to Diagnostic Trouble Code (DTC) List/Type in Body Control System

Go to Step 3

1. Move the headlamp switch to the HEAD position.
2. Move the headlamp dimmer switch the LOW BEAM position.
3. Use a test lamp in order to backprobe between C211, terminal E12 and ground.

Does the test lamp illuminate?

--

Go to Step 5

Go to Step 4

Locate and repair an open in CKT 525 (YEL) between the headlamp low beam bulbs and the multifunction switch.

Is the repair complete?

--

Go to Daytime Running Lights (DRL) System Check

--

Replace the multifunction switch.

Is the repair complete?

--

Go to Daytime Running Lights (DRL) System Check

--