GM Service Manual Online
For 1990-2009 cars only

Step

Action

Value(s)

Yes

No

1

Did you perform the Automatic Day-Night Mirrors System Check?

--

Go to Step 2

Go to Automatic Day-Night Mirrors System Check

2

  1. Disconnect connector at automatic day/night inside rear view mirror.
  2. Turn the ignition switch to the RUN position.
  3. Place the transmission in REVERSE.
  4. Connect a test lamp from cavity 3 of the automatic day/night inside rear view mirror to ground.

Does the test lamp light?

--

Go to Step 3

Go to Step 4

3

Replace the automatic day/night inside rear view mirror. Refer to Inside Rearview Mirror Replacement .

Is the repair complete?

--

Go to Automatic Day-Night Mirrors System Check

--

4

Inspect the 25A B/U LP fuse in the underhood fuse block.

Is the fuse blown?

--

Go to Step 5

Go to Step 6

5

  1. Repair the short circuit between the 25A B/U LP fuse and the 15A VEH B/U fuse.
  2. Replace the 25A B/U LP fuse.

Is the repair complete?

--

Go to Automatic Day-Night Mirrors System Check

--

6

Inspect the 15A VEH B/U fuse in the underhood fuse block.

Is the fuse blown?

--

Go to Step 7

Go to Step 8

7

  1. Repair the short circuit to ground in CKT 1324 (LT GRN) between the 15A VEH B/U fuse and the inside rear view mirror.
  2. Replace the 15A VEH B/U fuse.

Is the repair complete?

--

Go to Automatic Day-Night Mirrors System Check

--

8

  1. Turn the ignition switch to the RUN position.
  2. Place the transmission in REVERSE.
  3. Use a test lamp in order to probe the metallic part of the 15A VEH B/U fuse in the underhood fuse block.

Does the test lamp light?

--

Go to Step 9

Go to Step 10

9

Repair the open in CKT 1324 (LT GRN) between 15A VEH B/U fuse and the inside rear view mirror.

Is the repair complete?

--

Go to Automatic Day-Night Mirrors System Check

--

10

    • For vehicles equipped with a manual transmission, use the following procedure:
        1. Turn the ignition switch to the RUN position.
        2. Place the transmission in REVERSE.
        3. Use a test lamp in order to probe terminal B of the backup lamp switch.
    • For vehicles equipped with an automatic transmission, use the following procedure:
        1. Turn the ignition switch to the RUN position.
        2. Place the transmission in REVERSE.
        3. Use a test lamp in order to probe terminal C of connector C1.

Does the test lamp light?

--

Go to Step 12

Go to Step 11

11

Repair the open in CKT 839 (PNK) between the 25A B/U LP fuse and one of the following components:

    • The manual transmission backup lamp
    • The automatic transmission range switch

Is the repair complete?

--

Go to Automatic Day-Night Mirrors System Check

--

12

    • For vehicles equipped with a manual transmission, use the following procedure:
        1. Turn the ignition switch to the RUN position.
        2. Place the transmission in REVERSE.
        3. Use a test lamp in order to probe terminal A of the backup lamp switch.
    • For vehicles equipped with an automatic transmission, use the following procedure:
        1. Turn the ignition switch to the RUN position.
        2. Place the transmission in REVERSE.
        3. Use a test lamp in order to probe terminal F of connector C1.

Does the test lamp light?

--

Go to Step 13

Go to Step 14

13

Repair the open in CKT 1524 (GRY) between the 15A VEH B/U fuse and one of the following components:

    • The manual transmission backup lamp switch
    • The automatic transmission range switch

Is the repair complete?

--

Go to Automatic Day-Night Mirrors System Check

--

14

Replace one of the following components:

    • The manual transmission backup switch
    • The automatic transmission range switch

Is the repair complete?

--

Go to Automatic Day-Night Mirrors System Check

--