GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1999 🢒 Envoy - 4WD 🢒 Body and Accessories 🢒 Bumpers 🢒 Front License Plate Bracket Replacement

Removal Procedure
  1. Remove the radiator grille. Refer to Grille Replacement in Exterior Trim.

    2. Object Number: 308156 Size: SH
  2. Remove the screws that retain the bracket to the front bumper.
  3. Remove the retainers that retain the bracket to the front bumper.
  4. Remove the bracket from the front bumper.

Installation Procedure

    Object Number: 308156 Size: SH
  1. Install the bracket to the front bumper.
  2. Install the retainer that retains the bracket to the front bumper.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the screws that retain the bracket to the front bumper.

    4. Tighten
    Tighten the bracket to the front bumper screws to 9.5 N·m (84 lb in).

  4. Install the radiator grille. Refer to Grille Replacement in Exterior Trim.