J 37043 Park Brake Cable Release Tool
1.1. | Slide the brake cable into the brake backing plate opening. |
1.2. | Install the cable retainer into the backing plate. |
1.3. | Verify the cable retainer fingers expand when the cable retainer is inserted into the backing plate. |
1.4. | Pull the cable end fitting as far rearward as possible. |
1.5. | Install the cable end fitting into the parking brake lever. |
Important: When routing the cables through the guide loop, route the left side cable first.
5.1. | Tighten the strap so it does not move along the rear axle. |
5.2. | Secure the loose end of the strap back through the tabs in the buckle. |