Did you review the seat belt circuit description and perform the necessary inspections?

--

Go to Step 2

Go to Seat Belt System Description and Operation

Verify that the fasten safety belt indicator is always on.

Does the fasten safety belt indicator operate normally?

--

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

Was the instrument panel cluster (IPC) system check performed?

--

Go to Step 4

Go to Diagnostic System Check - Instrument Cluster in Instrument Panel, Gages and Console

1. Turn the ignition switch to the ON position.
2. With a scan tool select instrument cluster (IPC), special functions, and lamp test.
3. Command the seat belt lamp ON.

Does the seat belt lamp turn ON and OFF when commanded?

--

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 5

Replace the IPC. Refer to Instrument Cluster Replacement in Instrument Panel, Gages and Console.

Is the repair complete?

--

Go to Step 6

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 3