Subject: | 00100A -- Console/Armrest Cam Latch Compliance |
Models: | 1998-2001 GMC Envoy |
2000-2001 GMC Jimmy Diamond Edition |
THIS BULLETIN CANCELS AND REPLACES BULLETIN 00100 ISSUED APRIL, 2001. THIS BULLETIN IS BEING REVISED TO INCLUDE A SERVICE PROCEDURE FOR CERTAIN 1998 VEHICLES THAT MAY REQUIRE THE REPLACEMENT OF THE UPPER CONSOLE PLATE. ALL COPIES OF BULLETIN 00100 SHOULD BE DESTROYED.
General Motors has decided that certain 1998-2001 GMC Envoys and 2000-2001 Jimmy Diamond Editions fail to conform to Federal/Canada Motor Vehicle Safety Standard 201, "Occupant Protection in Interior Impacts." These vehicles have a console cover/armrest cam latch that could release at less than 10 g vertical load requirement of the standard. During a crash, the console cover could open and the cover or items stored under it could injure an occupant.
Dealers are to replace the console latch mechanism.
Involved are certain 1998-2001 GMC Envoys and 2000-2001 Jimmy Diamond Edition vehicles built within these VIN breakpoints:
Year | Division | Model | Plant | From | Through |
---|---|---|---|---|---|
1998 | GMC | Envoy | Moraine | W2950001 | W2955851 |
1999 | GMC | Envoy | Moraine | X2950001 | X2955126 |
2000 | GMC | Envoy | Moraine | Y2100003 | Y2402333 |
2001 | GMC | Envoy | Moraine | 12100018 | 12100022 |
2000 | GMC | Jimmy Diamond Edition | Moraine | Y2108085 | Y2388366 |
2001 | GMC | Jimmy Diamond Edition | Moraine | 12100017 | 12100140 |
Important: Dealers should confirm vehicle eligibility through GMVIS (GM Vehicle Inquiry System) or GM Access Screen (Canada only) or DCS Screen 445 (IPC only) before beginning campaign repairs. [Not all vehicles within the above breakpoints may be involved.]
Involved vehicles have been identified by Vehicle Identification Number. Computer listings containing the complete Vehicle Identification Number, customer name and address data have been prepared, and are being furnished to involved dealers with the campaign bulletin. The customer name and address data furnished will enable dealers to follow up with customers involved in this campaign. Any dealer not receiving a computer listing with the campaign bulletin has no involved vehicles currently assigned.
These dealer listings may contain customer names and addresses obtained from Motor Vehicle Registration Records. The use of such motor vehicle registration data for any other purpose is a violation of law in several states/provinces/countries. Accordingly, you are urged to limit the use of this listing to the follow-up necessary to complete this campaign.
Parts required to complete this campaign are to be obtained from General Motors Service Parts Operations (GMSPO). Please refer to your "involved vehicles listing" before ordering parts. Normal orders should be placed on a DRO = Daily Replenishment Order. In an emergency situation, parts should be ordered on a CSO = Customer Special Order.
Part Number | Description | Qty/ Vehicle |
---|---|---|
15070844 | Panel Asm, F/Flr Cnsl Compt Dr Inr | 1 |
12475096 | Plate, F/Flr Cnsl Tr (Pewter) (1998 Vehicles Only) | 1 (If Req'd) |
12475097 | Plate, F/Flr Cnsl Tr (Beige) (1998 Vehicles Only) | 1 (If Req'd) |
11505213 | Nut, Push On (1998 Vehicles Only) | 2 (If Req'd) |
Important: The following inspection procedure only applies to 1998 vehicles. For 1999-2001 vehicles, proceed to the service procedure titled "Inner Console Cover Replacement."
Important: Some early production 1998 vehicles were manufactured with an upper console plate (1) that does not have a round or D-shaped hole (3) located between the two square holes (2). In order to perform this campaign, the vehicle MUST HAVE this additional hole (3) in the upper console plate.
Verify whether or not the vehicle has this additional hole by opening the console compartment cover and comparing the holes in the upper console plate to those shown in the illustration above.
• | If the upper console plate DOES have the hole (3) located between the two square holes (2), proceed to the service procedure titled "Inner Console Cover Replacement." |
• | If the upper console panel does NOT have the hole (3) located between the two square holes (2), proceed to the service procedure titled "Upper Console Plate Replacement." |
Important: For additional information, refer to the Instrument Panel and Console subsection in the Body and Accessories section of the appropriate Service Manual.
It is not necessary to remove the console outer cover from the hinge assembly.
Tighten
Tighten all screws to 1.5 N·m (13 lb in).
Tighten
Tighten the screws to 6 N·m (53 lb in).
Tighten
Tighten the screws to 2 N·m (17 lb in) and
reinstall the tape over the two top screws.
Tighten
Tighten all screws to 1.5 N·m (13 lb in).
Tighten
Tighten the bolts to 10 N·m (88 lb in).
FOR US AND IPC
Place a Campaign Identification Label on each vehicle in accordance with the instructions outlined in this Product Campaign Bulletin. Each label provides a space to include the campaign number and the five (5) digit dealer code of the dealer performing the campaign service. This information may be inserted with a typewriter or a ball point pen.
Put the Campaign Identification Label on a clean and dry surface of the radiator core support in an area that will be visible to people servicing the vehicle. When installing the Campaign Identification Label, be sure to pull the tab to allow the adhesion of the clear protective covering. Additional Campaign Identification Labels for US dealers can be obtained from Dealer Support Materials by calling 1-888-549-6152 (Monday-Friday, 8:00 am to 5:00 pm EST). Ask for Item Number S-1015 when ordering.
Additional Campaign Identification Labels for IPC dealers can be obtained from your Regional Marketing Office.
FOR CANADA
Place a Campaign Identification Label on each vehicle in accordance with the instructions outlined in this Product Campaign Bulletin. Each label provides a space to include the campaign number and the five (5) digit dealer code of the dealer performing the campaign service. This information may be inserted with a typewriter or a ball point pen.
Put the Campaign Identification Label on a clean and dry surface of the radiator core support in an area that will be visible to people servicing the vehicle. Additional Campaign Identification Labels for Canadian dealers can be obtained from DGN by calling 1-800-668-5539 (Monday-Friday, 8:00 am to 5:00 pm EST). Ask for Item Number GMP 91 when ordering.
Submit a Product Campaign Claim with the information indicated below:
Repair Performed | Part Count | Part No. | Parts Allow | CC-FC | Labor Op | Labor Hours* |
---|---|---|---|---|---|---|
Install Inner Console Cover | 1 | -- | ** | MA-96 | V0721 | 0.2 |
Add: Install Upper Console Replacement (1998 Vehicles Only) | 1 |
|
|
|
| 0.5 |
* -- For Campaign Administrative Allowance, add 0.1 hours to the "Labor Hours". ** -- The "Parts Allowance" should be the sum total of the current GMSPO Dealer Net price plus applicable Mark-Up or Landed Cost Mark-Up (for IPC) for the panel assembly needed to complete the repair. |
Refer to the General Motors WINS Claim Processing Manual for details on Product Campaign Claim Submission.
FOR US AND CANADA
Customers will be notified of this campaign on their vehicles by General Motors (see copy of customer letter included with this bulletin).
FOR IPC
Letters will be sent to known owners of record located within areas covered by the US National Traffic and Motor Vehicle Safety Act. For owners outside these areas, dealers should notify customers using the attached suggested dealer letter.
FOR US AND IPC (US States, Territories, and Possessions)
The US National Traffic and Motor Vehicle Safety Act provides that each vehicle that is subject to a recall campaign of this type must be adequately repaired within a reasonable time after the customer has tendered it for repair. A failure to repair within sixty days after tender of a vehicle is prima facie evidence of failure to repair within a reasonable time. If the condition is not adequately repaired within a reasonable time, the customer may be entitled to an identical or reasonably equivalent vehicle at no charge or to a refund of the purchase price less a reasonable allowance for depreciation. To avoid having these burdensome remedies, every effort must be made to promptly schedule an appointment with each customer and to repair their vehicle as soon as possible. In the recall campaign notification letters, customers are told how to contact the US National Highway Traffic Safety Administration if the campaign is not completed within a reasonable time.
This bulletin is notice to you that the new motor vehicles included in this campaign may not comply with the standard identified above. Under Title 49, Section 30112 of the United States Code, it is illegal for a dealer to sell a new motor vehicle which the dealer knows does not comply with an applicable Federal Motor Vehicle Safety Standard. As a consequence, if you sell any of these motor vehicles without first performing the campaign correction, your dealership may be subject to a civil penalty for each such sale.
ALL
All unsold new vehicles in dealers' possession and subject to this campaign MUST be held and inspected/repaired per the service procedure of this campaign bulletin BEFORE customers take possession of these vehicles.
Dealers are to service all vehicles subject to this campaign at no charge to customers, regardless of mileage, age of vehicle, or ownership, from this time forward.
Customers who have recently purchased vehicles sold from your vehicle inventory, and for which there is no customer information indicated on the dealer listing, are to be contacted by the dealer. Arrangements are to be made to make the required correction according to the instructions contained in this bulletin. This could be done by mailing to such customers a copy of the customer letter accompanying this bulletin. Campaign follow-up cards should not be used for this purpose, since the customer may not as yet have received the notification letter.
In summary, whenever a vehicle subject to this campaign enters your vehicle inventory, or is in your dealership for service in the future, please take the steps necessary to be sure the campaign correction has been made before selling or releasing the vehicle.
April, 2001Dear General Motors Customer:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
General Motors has decided that certain 1998-2001 GMC Envoys and 2000-2001 Jimmy Diamond Editions fail to conform to Federal/Canada Motor Vehicle Safety Standard 201, "Occupant Protection in Interior Impacts." These vehicles have a console cover/armrest cam latch that could release at less than 10 g vertical load requirement of the standard. During a crash, the console cover could open and the cover or items stored under it could injure an occupant.
Your dealer will replace the console latch mechanism. This service will be performed for you at no charge .
The length of time required to perform this service correction is approximately fifteen minutes. Additional time may be required to schedule and process your vehicle. If you dealer has a large number of vehicles awaiting service, this additional time may be significant. Please ask your dealer if you wish to know how much additional time will be needed schedule, process, and repair your vehicle.
Please contact your dealer as soon as possible to arrange a service date. Parts are available and instructions for making this correction have been sent to your dealer.
Your dealer is best equipped to obtain parts and provide services to correct your vehicle as promptly as possible. Should your dealer be unable to schedule a service date within a reasonable time, you should contact the appropriate Customer Assistance Center at the number listed below:
Division | Number | Deaf, Hearing Impaired, or Speech Impaired* |
---|---|---|
GMC | 1-800-462-8782 | 1-800-462-8583 |
GMODC | (905)644-4112 |
|
Puerto Rico - English | 1-800-496-9992 |
|
Puerto Rico - EspaƱol | 1-800-496-9993 |
|
Virgin Islands | 1-800-496-9994 |
|
* Utilizes Telecommunication Devices for the Deaf/Text Telephones (TDD/TTY) |
If, after contacting the appropriate customer assistance center, you are still not satisfied that we have done our best to remedy this condition without charge and within a reasonable time, you may wish to write the Administrator, National Highway Traffic Safety Administration, 400 Seventh Street SW, Washington, DC 20590 or call 1-888-327-4236.
The attached customer reply card identifies your vehicle. Presentation of this card to your dealer will assist in making the necessary correction in the shortest possible time. If you no longer own this vehicle, please let us know by completing the attached and mailing it in the postage paid envelope.
We are sorry to cause you this inconvenience; however, we have taken this action in the interest of your safety and continued satisfaction with our products.
General Motors Corporation
Enclosure