F/CMVSS Noncompliance - Console/Armrest Latch Compliance

General Motors has decided that certain 2002 GMC Envoys fail to conform to Federal/Canada Motor Vehicle Safety Standard 201, "Occupant Protection in Interior Impacts." These vehicles have a console cover/armrest latch that could release at less than the 10 g vertical load requirement of the standard. During a crash, the console cover could open and the cover or items stored under it could injure an occupant.

Dealers are to replace the console latch mechanism and install a striker plate.

Involved are certain 2002 GMC Envoys built within these VIN breakpoints:

Important: Dealers should confirm vehicle eligibility through GMVIS (GM Vehicle Inquiry System) or GM Access Screen (Canada only) or DCS Screen 445 (IPC only) before beginning campaign repairs. [Not all vehicles within the above breakpoints may be involved.]

Involved vehicles have been identified by Vehicle Identification Number. Computer listings containing the complete Vehicle Identification Number, customer name and address data have been prepared, and are being furnished to involved dealers with the campaign bulletin. The customer name and address data furnished will enable dealers to follow up with customers involved in this campaign. Any dealer not receiving a computer listing with the campaign bulletin has no involved vehicles currently assigned.

These dealer listings may contain customer names and addresses obtained from Motor Vehicle Registration Records. The use of such motor vehicle registration data for any other purpose is a violation of law in several states/provinces/countries. Accordingly, you are urged to limit the use of this listing to the follow-up necessary to complete this campaign.

Preshipment -- For U.S. and Canada Only

Important: An initial supply (50% of parts required to complete this campaign) will be pre-shipped to involved dealers of record. This pre-shipment is scheduled to begin the week of July 9, 2001. Pre-shipped parts will be charged to dealer's open parts account.

Additional parts, if required, are to be obtained from General Motors Service Parts Operations (GMSPO). Please refer to your "involved vehicles listing" before ordering parts. Normal orders should be placed on a DRO = Daily Replenishment Order. In an emergency situation, parts should be ordered on a CSO = Customer Special Order.

Important: Since this service procedure can be performed quickly and easily, and to reduce the inconvenience to the customer, when a customer brings their vehicle into your dealership for this campaign, if at all possible, have this campaign performed on the vehicle immediately so that the customer does not have to leave their vehicle at the dealership.

1. Open the console door and remove the rubber mat (2) from the bottom of the storage bin (3) and also the rubber insert (1) at the upper rear of the bin.
2. Remove the six screws that attach the storage bin to the console and remove the storage bin.

Important: Install the metal striker plate in the next step with the bent edges of the striker plate facing downward, and the square hole in the striker plate aligned with the square hole in the console.

3. Carefully raise up the rear edge of the console top cover (5) about 6mm (1/4 in) and slide the metal striker plate (4) included with the campaign kit underneath. When properly installed, the metal striker plate will be in between the console top cover (5) and the console (6) as shown.
4. Install the storage bin in the console and install the six screws.

Tighten
Tighten the screws to 2 N·m (18 lb in).

5. Reinstall the rubber insert and mat in the storage bin.



6. Remove the four screws attaching the inside of the console door panel (2) to the outer console door cover (3).

Important: Do not remove the console door from the attaching hinge.

7. Carefully separate or spread apart the upper portion of the outer console door cover from the inner console door panel approximately 6mm (1/4 in).
8. Remove the plastic latch (1) from between the inner panel and the outer cover.
9. Install the new plastic latch, included in the campaign kit, between the inner panel and the outer cover.
10. Reposition the inner panel to the outer cover and install the four screws.

Tighten
Tighten the screws to 2 N·m (18 lb in).

11. Close the console door and verify that the latch operates properly.
12. Install the GM Campaign Identification Label.

FOR US AND IPC

Place a Campaign Identification Label on each vehicle in accordance with the instructions outlined in this Product Campaign Bulletin. Each label provides a space to include the campaign number and the five (5) digit dealer code of the dealer performing the campaign service. This information may be inserted with a typewriter or a ball point pen.

Put the Campaign Identification Label on a clean and dry surface of the radiator core support in an area that will be visible to people servicing the vehicle. When installing the Campaign Identification Label, be sure to pull the tab to allow the adhesion of the clear protective covering. Additional Campaign Identification Labels for US dealers can be obtained from Dealer Support Materials by calling 1-888-549-6152 (Monday-Friday, 8:00 am to 5:00 pm EST). Ask for Item Number S-1015 when ordering.

Additional Campaign Identification Labels for IPC dealers can be obtained from your Regional Marketing Office.

FOR CANADA

Place a Campaign Identification Label on each vehicle in accordance with the instructions outlined in this Product Campaign Bulletin. Each label provides a space to include the campaign number and the five (5) digit dealer code of the dealer performing the campaign service. This information may be inserted with a typewriter or a ball point pen.

Put the Campaign Identification Label on a clean and dry surface of the radiator core support in an area that will be visible to people servicing the vehicle. Additional Campaign Identification Labels for Canadian dealers can be obtained from DGN by calling 1-800-668-5539 (Monday-Friday, 8:00 am to 5:00 pm EST). Ask for Item Number GMP 91 when ordering.

Submit a Product Campaign Claim with the information indicated below:

Refer to the General Motors WINS Claim Processing Manual for details on Product Campaign Claim Submission.

FOR US AND CANADA

Customers will be notified of this campaign on their vehicles by General Motors (see copy of customer letter included with this bulletin).

FOR IPC

Letters will be sent to known owners of record located within areas covered by the US National Traffic and Motor Vehicle Safety Act. For owners outside these areas, dealers should notify customers using the attached suggested dealer letter.

FOR US AND IPC (US States, Territories, and Possessions)

The US National Traffic and Motor Vehicle Safety Act provides that each vehicle that is subject to a recall campaign of this type must be adequately repaired within a reasonable time after the customer has tendered it for repair. A failure to repair within sixty days after tender of a vehicle is prima facie evidence of failure to repair within a reasonable time. If the condition is not adequately repaired within a reasonable time, the customer may be entitled to an identical or reasonably equivalent vehicle at no charge or to a refund of the purchase price less a reasonable allowance for depreciation. To avoid having these burdensome remedies, every effort must be made to promptly schedule an appointment with each customer and to repair their vehicle as soon as possible. In the recall campaign notification letters, customers are told how to contact the US National Highway Traffic Safety Administration if the campaign is not completed within a reasonable time.

This bulletin is notice to you that the new motor vehicles included in this campaign may not comply with the standard identified above. Under Title 49, Section 30112 of the United States Code, it is illegal for a dealer to sell a new motor vehicle which the dealer knows does not comply with an applicable Federal Motor Vehicle Safety Standard. As a consequence, if you sell any of these motor vehicles without first performing the campaign correction, your dealership may be subject to a civil penalty for each such sale.

ALL

All unsold new vehicles in dealers' possession and subject to this campaign MUST be held and inspected/repaired per the service procedure of this campaign bulletin BEFORE customers take possession of these vehicles.

Dealers are to service all vehicles subject to this campaign at no charge to customers, regardless of mileage, age of vehicle, or ownership, from this time forward.

Customers who have recently purchased vehicles sold from your vehicle inventory, and for which there is no customer information indicated on the dealer listing, are to be contacted by the dealer. Arrangements are to be made to make the required correction according to the instructions contained in this bulletin. This could be done by mailing to such customers a copy of the customer letter accompanying this bulletin. Campaign follow-up cards should not be used for this purpose, since the customer may not as yet have received the notification letter.

In summary, whenever a vehicle subject to this campaign enters your vehicle inventory, or is in your dealership for service in the future, please take the steps necessary to be sure the campaign correction has been made before selling or releasing the vehicle.

Dear General Motors Customer:

This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.

General Motors has decided that certain 2002 GMC Envoys fail to conform to Federal/Canada Motor Vehicle Safety Standard 201, "Occupant Protection in Interior Impacts." These vehicles have a console cover/armrest latch that could release at less than the 10 g vertical load requirement of the standard. During a crash, the console cover could open and the cover or items stored under it could injure an occupant.

Your GMC dealer will replace the console latch mechanism and install a striker plate. This service will be performed for you at no charge .

The length of time required to perform this service correction is approximately fifteen minutes. Additional time may be required to schedule and process your vehicle. If you dealer has a large number of vehicles awaiting service, this additional time may be significant. Please ask your dealer if you wish to know how much additional time will be needed schedule, process, and repair your vehicle.

Please contact your GMC dealer as soon as possible to arrange a service date. Parts are available and instructions for making this correction have been sent to your dealer.

Your GMC dealer is best equipped to obtain parts and provide services to correct your vehicle as promptly as possible. Should your dealer be unable to schedule a service date within a reasonable time, you should contact the appropriate Customer Assistance Center at the number listed below:

If, after contacting the appropriate customer assistance center, you are still not satisfied that we have done our best to remedy this condition without charge and within a reasonable time, you may wish to write the Administrator, National Highway Traffic Safety Administration, 400 Seventh Street SW, Washington, DC 20590 or call 1-888-327-4236.

The attached customer reply card identifies your vehicle. Presentation of this card to your dealer will assist in making the necessary correction in the shortest possible time. If you no longer own this vehicle, please let us know by completing the attached and mailing it in the postage paid envelope.

We are sorry to cause you this inconvenience; however, we have taken this action in the interest of your safety and continued satisfaction with our products.

Pontiac-GMC Division

General Motors Corporation

Enclosure