Info - Proper Position and Installation of Roof Rack Cross Rails to Reduce Wind Noise

Some of the above vehicles may exhibit wind noise related to the roof rack. In an effort to reduce wind noise, Engineering has identified a specific position and installation for the roof rack cross rails.

It has been found that some dealers are changing the direction of the cross rails thinking they were installed incorrectly.

To obtain the optimum position and installation of the roof rack cross rails that produce the least wind noise, use the following procedure:

1. If the cross rails have directional arrows, they should be installed in the reverse direction (arrows toward rear of vehicle). Remove the cross rails and rotate as necessary.
2. If the directional arrows are not present, installation can be verified by checking the location of the cross rail eyelets. When installed in the reverse direction, the cross rail eyelets will face the rear of the vehicle. Remove the cross rails and rotate as necessary.
3. Once the specified direction has been established, adjust the position of the cross rails, so that one cross rail is positioned at the rear most end of the vehicle. The other cross rail should then be positioned at approximately midpoint of the rear door glass.

For vehicles repaired under warranty, use: