GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2003 🢒 Envoy - 4WD 🢒 Suspension 🢒 Rear Suspension 🢒 Stabilizer Shaft Insulator Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

    2. Object Number: 731629 Size: SH
  2. Remove the stabilizer shaft insulator clamp mounting nut.
  3. Remove the stabilizer shaft insulator clamp.
  4. Remove the stabilizer shaft insulator from the stabilizer shaft.

Installation Procedure

    Object Number: 731629 Size: SH
  1. Install the stabilizer shaft insulator to the stabilizer shaft.
  2. Install the stabilizer shaft insulator clamp.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the stabilizer shaft insulator clamp mounting nut.

    4. Tighten
    Tighten the stabilizer shaft insulator clamp mounting nut to 70 N·m (52 lb ft).

  4. Lower the vehicle.