Rear Number 1 Seat Back Release Latch Replacement TrailBlazer, Envoy, Rainier

1. Remove the seat back cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement .



2. Remove the release latch by pinching the lower locking tabs together.



3. Remove the release cable from the release latch.

1. Install the release cable to the release latch.



2. Install the release latch to the seat frame by pressing the latch into the seat frame until the locking tabs are fully engaged.
3. Install the seat back cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement .

Rear Number 1 Seat Back Release Latch Replacement TrailBlazer EXT, Envoy XL

1. Remove the head restraint. Refer to Rear Seat Head Restraint Replacement .



2. Remove the 2 screws securing the seat back release latch handle to the seat back.
3. Remove the seat back cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement .



4. Remove the clips (2) securing the seat back release latch cable to the seat back frame.
5. Remove the cable from the slot in the cam (1).

1. Install the clips securing the seat back release latch cable to the seat back frame.
2. Install the cable end into the cam (1).
3. Install the seat back cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement .

Notice: Refer to Fastener Notice in the Preface section.

4. Install the seat back release latch handle to the seat back with 2 screws.

Tighten
Tighten the seat back release latch handle screws to 2 N·m (18 lb in).