GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2009 🢒 Envoy - 4WD 🢒 Body Repair 🢒 Frame and Underbody 🢒 Assist Step Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

    2. Object Number: 750777 Size: SH
  2. Remove the nuts (1) that retain the assist step to the assist step support brackets.
  3. Remove the assist step from the support brackets.
  4. Place the assist step on a clean, prepared surface.
  5. Release the fasteners (2) that retain the assist step pad to the assist step.
  6. Remove the assist step pad from the assist step.

Installation Procedure

    Object Number: 750777 Size: SH
  1. Install the assist step pad to the assist step, ensuring that the fasteners (2) are fully seated.
  2. Position the assist step to the vehicle.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the nuts (1) that retain the assist step to the assist step support brackets and tighten to 25 N·m (18 lb ft).
  4. Lower the vehicle. Refer to Lifting and Jacking the Vehicle.