This supplemental bulletin contains a revised illustration to clarify the location of the vacuum tee (P/N 14057211) to be replaced in Campaign Bulletin 83-C-09, issued November, 1983.
SERVICE PROCEDURE
1. Raise hood.
2. Remove air cleaner assembly.
3. Remove vacuum tee that contains hoses from the EGR valve, air cleaner and carburetor vacuum port (Refer to illustration).
4. Install new vacuum tee P/N 14057211 as shown in illustration.
5. Reinstall air cleaner and hoses to the EGR valve, air cleaner and carburetor vacuum.
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.