3-4 CLUTCH APPLY RING DIMENSION CORRECTION

MODELS: 1982 L.D. TRUCKS EQUIPPED WITH MODEL 700-R-4 AUTOMATIC TRANSMISSION

The 3 - 4 clutch apply ring chart, Figure 700-R4-33, presently shown in shop manual (X-8232) of vehicles using the Model 700-R4 Automatic Transmission is incorrect. The correct dimension for this application is shown below.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.