3-4 CLUTCH APPLY RING DIMENSION CORRECTION

THE 3-4 CLUTCH APPLY RING CHART, FIGURE 700-R4-33, PRESENTLY SHOWN IN SHOP MANUALS OF VEHICLES USING THE MODEL 700-R4 AUTOMATIC TRANSMISSION IS INCORRECT. THE CORRECT DIMENSION FOR THIS APPLICATION IS SHOWN BELOW. 3-4 CLUTCH APPLY RING DIM. A TW & TC 98.53MM (3.88") ALL OTHERS 94.13MM (3.71") PLEASE MAKE NOTE OF THIS CHANGE IN YOUR COPY OF THE SHOP MANUAL.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.