SHIFT LEVER RATTLE OR BUZZ INSTALL NEW DESIGN LEVER

MODELS: 1988 C/K MODELS WITH 117MM MANUAL TRANSMISSION (OPT M20)

Some 1988 C/K trucks equipped with 117mm manual transmissions may experience a shift lever rattle or buzz condition in any gear.

The rattle/buzz can be repaired by installing a new shift lever which has an isolator to absorb the noise and vibrations associated with this condition.

PARTS INFORMATION

P/N 15611408 Shift Lever*

LABOR OPERATION

K1060 Lever,GearshiftControl- Replace .2 hr

*The new shift lever can be identified by the one bend in it (at the floor) versus the former shift lever which has a bend at both the floor and at the shift knob.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.