DRIVELINE CLUNK DURING GARAGE SHIFT OR HARD ACCELERATION

VEHICLE APPLICATIONS: C-TRUCKS

Bulletin Covers:

Service and parts information for vehicles which may exhibit a clunking noise during a garage shift or a driveline clunk during hard acceleration. Vehicles may be affected if they were built within the following VIN number ranges:

Chevrolet 1GCDC14K2LZI00013 - 1GCDC14Z2LZ101290 GMC 1GTDC14Z1LZ500000 - IGTDC14KXLZ500368

SERVICE PROCEDURE: (Figure 1)

This condition can be repaired by installing a reinforcement plate in the tailshaft crossover support.

To install the reinforcement plate, remove the nut and washer from the underside of the transmission crossmember. Install reinforcement plate onto the bolt that passes through crossmember and replace the washer and nut. Torque the nut 54 N-m (40 ft.lbs.).

SERVICE PARTS INFORMATION:

Part Name Part Number ---------- ----------- Reinforcement Plate 15567681

SERVICE MANUAL REFERENCE:

This information is not contained in any Service Manual.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.