Tools Required

J 41371 Reluctor Wheel Remover

1. Disconnect the battery negative cable from the battery. Refer to Battery Cable in Engine Electrical.
2. Remove the crankshaft balancer from the crankshaft. Refer to Crankshaft Balancer Replacement .
3. Remove the water pump from the engine block. Refer to Water Pump Replacement in Engine Cooling.
4. Remove the engine front cover from the engine block. Refer to Engine Front Cover Replacement .
5. Use the J 41371 to remove the reluctor ring from the crankshaft.

Important: Replace the crankshaft position sensor whenever the crankshaft position reluctor ring is replacement.

1. Install the crankshaft position reluctor ring on to the crankshaft.
2. Install the engine front cover to the engine block. Refer to Engine Front Cover Replacement .
3. Install the water pump to the engine block. Refer to Water Pump Replacement in Engine Cooling.
4. Install the crankshaft balancer to the crankshaft. Refer to Crankshaft Balancer Replacement .
5. Connect the battery negative cable to the battery. Refer to Battery Cable in Engine Electrical.