If a body panel or a component with a bi-fuel decal is replaced, apply the new decal as follows:

1. Some bi-fuel decals require information such as the date of manufacture or the tank service expiration date. Record any necessary information before applying the decal to the vehicle.

The following labels appear on this vehicle:

•	Bi-Fuel Information Label (1)

•	CNG Fill Caution Label (2)

•	CNG Filter Label (3)

•	CNG Fuel Only Label (4)

•	CNG Manual Shut-off Valve Label (5)

•	CNG Warning Diamond

•	Manufacturer Alteration Label

•	Periodic Gasoline Operation Label

•	"Powered By Natural Gas" Label

•	Tank Labels

•	VECI Label

2. Clean the area where the decal will be applied. Use a solvent such as naphata or a 50/50 mixture of isopropyl alcohol and water.
3. Dry the area thoroughly.



4. Repaint and feather any chipped paint in the area.

Important: The surface and the decal must be warmed to between 27°C and 38°C (80°F and 100°F).

5. Apply the decal to the surface of the vehicle.