Subject: | Guidelines for Proper Use of Labor Operation Numbers When Servicing Transfer Case |
Models: | 2006 and Prior Passenger Cars and Light/Medium Duty Trucks |
| with Four-Wheel Drive (4WD) or All-Wheel Drive (AWD) System |
When servicing the transfer case, some dealers are using the incorrect labor operation number when submitting warranty claims. The following information is a guideline to further assist dealers in the proper use of transfer case related labor operation
numbers. This information provides the correct labor operation number/description, vehicle application and vehicle exceptions.
Labor Operation
| Description
|
K4120
| Switch, Vacuum Control - Replace
|
• | This labor operation applies to NVG 233 and NVG 236 (RPO NP1 and NP8) transfer cases. |
• | The following transfer cases DO NOT incorporate a vacuum switch. Labor operation K4120 will NOT apply to these transfer cases. |
- | NVG 226/236/246 (RPO NP8) |
- | BW 4482/4484/4493 (RPO NR4) |
Labor Operation
| Description
|
K4121
| Module, Transfer Case - Reprogram
|
The following transfer cases DO NOT incorporate reprogrammable modules. Labor operation K4121 will NOT apply to these transfer cases.
• | Isuzu T150/NVG 233 (RPO NP1) |
• | NVG 246 (RPO NP8) (1998-2002) |
Labor Operation
| Description
|
K4122
| Module, Transfer Case Shift - Replace
|
The following transfer cases DO NOT incorporate shift control modules. Labor operation K4122 will NOT apply to these transfer cases.
Labor Operation
| Description
|
K4123
| Switch, Transfer Case Select - Replace
|
The following transfer cases DO NOT incorporate shift select switches. Labor operation K4123 will NOT apply to these transfer cases.
Labor Operation
| Description
|
K4124
| Sensor Assembly, Transfer Case Range Selector - Replace
|
The following transfer cases DO NOT have replaceable actuator position sensors. Labor operation K4124 will NOT apply to these transfer cases.
• | NVG 246 (RPO NP8) (1998-2002) |
• | BW 4482/4484/4493 (RPO NR4) |
Labor Operation
| Description
|
K4126
| Actuator Assembly, Transfer Case - Replace
|
The following transfer cases are NOT equipped with actuator assemblies. Labor operation K4126 will NOT apply to these transfer cases.
RPO Definitions
RPO
| Description
|
NP1
| Transfer Case - Electronic Shift Control, Two-Speed
|
NP2
| Transfer Case - Manual Shift Control, Two-Speed
|
NP3
| Transfer Case - All Wheel Drive (AWD)
|
NP4
| Transfer Case - Active, All Wheel Drive (AWD)
|
NP8
| Transfer Case - Active, Two-Speed, Push Button Control
|
NR3
| Transfer Case - All Wheel Drive (AWD), Open Diff., Single Speed
|
NR4
| Transfer Case - Four Wheel Drive (4WD), Open Diff., Two-Speed
|
NR6
| Transfer Case - Four Wheel Drive (4WD), Open Diff., Two-Speed, High Ratio
|