Notice: Allowing the drive belt tensioner to snap into the free position may result in damage to the tensioner.

1. Remove the drive belts from the pulleys. Refer to Drive Belt Replacement .
2. Position a hex-head socket on the belt tensioner pulley bolt head.
3. Move the drive belt tensioner through its full travel.

Ensure that the following conditions exist:

•	The movement feels smooth.

•	There is no binding.

•	The tensioner returns freely.

4. If any binding is observed, replace the tensioner. Refer to Drive Belt Tensioner Replacement .
5. Install the drive belt on the pulleys. Refer to Drive Belt Replacement .