Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Inspect the upper control arm bushing bolts at the rear axle. Are the bolts loose? | -- | Go to Step 2 | Go to Step 3 |
2 | Tighten the bolts to specification. Refer to Fastener Tightening Specifications . Is the ping, snap or click noise still evident? | -- | Go to Step 3 | System OK |
3 | Inspect the lower control arm bushing bolts at the rear axle. Are the bolts loose? | -- | Go to Step 4 | Go to Step 5 |
4 | Tighten the bolts to specification. Refer to Fastener Tightening Specifications . Is the ping, snap or click noise still evident? | -- | Go to Step 5 | System OK |
5 | Inspect the companion flange. Is the companion flange loose? | -- | Go to Step 6 | -- |
6 |
Is the ping, snap or click noise still evident? | -- | -- | System OK |
For additional vibration diagnosis, refer to Vibration Diagnosis in General Information. | ||||
