Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 |
Did the test lamp light? | -- | Go to Step 3 | Go to Step 2 |
2 | Connect a test lamp from CKT 1540 (ORN) at the turn signal flasher harness connector to chassis ground. Did the test lamp light? | -- | Go to Step 4 | Go to Step 5 |
3 | Connect a test lamp from CKT 27 (BRN) at the hazard switch to chassis ground. Did the test lamp light? | -- | Go to Step 6 | Go to Step 7 |
4 | Replace the turn signal flasher. Is the repair complete? | -- | System OK | -- |
5 | Locate and repair the open in CKT 1540 (ORN) between the turn signal flasher harness connector and the IP fuse block. Is the repair complete? | -- | System OK | -- |
6 | Replace the hazard switch. Refer to Hazard Warning Switch Replacement - On Vehicle . Is the repair complete? | -- | System OK | -- |
7 | Locate and repair the open in CKT 27 (BRN) between the turn signal flasher harness connector and the hazard switch harness connector. Is the repair complete? | -- | System OK | -- |
