Tools Required

J 25300-A Headlamp Aimer

You can adjust the horizontal and vertical aiming of each headlamp using two adjusting screws. The adjusting screws move the mounting bracket against the tension of the coil spring. The screws are located in the headlamp bezel area. On the left side headlamp, one adjusting screw is located above the headlamp and the other screw is located to the right of the headlamp. On the right side headlamp, one adjusting screw is located above the headlamp and the other screw is located to the left of the headlamp. The adjusting screw directly above the headlamp (1) adjusts the vertical position. The screw to the right or left (2), depending on the headlamp being adjusted, of the headlamp adjusts the horizontal position of the headlamp.

Use the J 25300-A in order to adjust the headlamps to the specifications required by state and/or local authorities. Instructions for tool use accompany the tool.