Clearance Lamp Replacement Lamp Bulb

1. Remove the lens screws.
2. Remove the lens.
3. Remove the bulb.

1. In order to install the bulb, push in the bulb until the bulb is seated.
2. Install the lens.
3. Install the lens screws.

Clearance Lamp Replacement Lamp Housing

Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

1. Disconnect the negative battery cable.



2. Remove the lens hold-down screws.
3. Remove the lens.
4. In order to remove the insulator, pull the socket and harness assembly through the insulator.
5. Disconnect the harness assembly electrical connector.

1. Connect the harness assembly electrical connector.
2. In order to install the insulator, push the socket and harness assembly into the insulator and align the holes on the cab.
3. Install the lens.
4. Install the lens hold-down screws.
5. Connect the negative battery cable.