- Remove the steering column lock cylinder set. Refer to
Steering Column Lock Cylinder Set - Disassemble - Off Vehicle
.
- Remove the thrust washer.
- Remove the 4 hex
washer head tapping screws (1) from the lock housing cover assembly (2).
- Remove the lock housing cover assembly (2) from the steering
column jacket assembly (4).
- Remove the floor shift bowl (3) from the jacket assembly (4)
with the switch actuator rod still attached.
- Remove the 3 pan
head 6-lobed socket screws (3).
- Remove the upper bearing
retainer (3).
- Remove the bearing retaining bushing (2).
- Remove the bearing assembly (1).