- Clean grease and road dirt from the wheel.
- Clean the rubber from the bead seat using a wire brush or steel wool.
- Inspect the gutter areas for bulges. Remove any bulges that you find.
- Inspect the mounting area for bulges. Smooth any bulges that you find.
- Inspect the fixed flange area for nicks and gouges that may cause rim fracture.
Notice: Do not heat wheels in an attempt to soften them for straightening or repair damage from striking curbs, etc. Do not weld wheels. The alloy used in these wheels is heat-treated and uncontrolled heating from welding affects the properties of the material.
Bulges will cause the following conditions:
| • | Uneven seating of the side ring |
| • | Uneven seating of the lock ring |
| • | Chipping of the gutter |
Problem | Possible Cause | Correction |
|---|---|---|
Tire Slippage on Rim. | Improper storage or operating conditions. | Correct as required. |
Poor maintenance. | Follow the proper maintenance procedures. | |
Rust, corrosion or faulty bead seating. | Correct as required. | |
Loss of pressure. | Follow the proper maintenance procedures. | |
Tire Mounting Difficulties. | Mismatched tire and rim size. | Correct as required. |
Over inflation of the tires. | Follow the proper maintenance procedures. | |
Corrosion and dirt. | Correct as required. |
