The switch actuator arm is loose.

Tighten the screw. Refer to Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle and Steering Shaft, Lower Bearing, and Jacket - Assemble - Off Vehicle .

The yoke is broken or distorted.

Replace the switch. Refer to Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle and Steering Shaft, Lower Bearing, and Jacket - Assemble - Off Vehicle .

The springs are loose or misplaced.

Reposition or replace the springs. Refer to Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle and Steering Shaft, Lower Bearing, and Jacket - Assemble - Off Vehicle .

The foreign parts or materials are present.

Remove the foreign parts or materials. Refer to Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle and Steering Shaft, Lower Bearing, and Jacket - Assemble - Off Vehicle .

The switch is mounted loosely.

Tighten the screws. Refer to Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle and Steering Shaft, Lower Bearing, and Jacket - Assemble - Off Vehicle .