GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2001 🢒 GMC C-Series Medium Duty Truck B7 🢒 Driveline/Axle 🢒 Rear Axle Controls 🢒 Two Speed Rear Axle Shift Control Switch Replacement

Removal Procedure

    Object Number: 202626 Size: SH

    Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
  2. Disconnect the two-speed rear axle shift actuator control switch electrical connector (1).
  3. Remove the retaining bolt and clamp (2).
  4. Remove the two-speed rear axle shift actuator control switch (3).

Installation Procedure

    Object Number: 202626 Size: SH
  1. Install the two-speed rear axle shift actuator control switch (3).
  2. Install the retaining clamp and bolt (2).
  3. Connect the two-speed rear axle shift actuator control switch electrical connector (1).
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.