Notice: Refer to Torque Converter Housing/Low and Reverse Clutch Housing Bolt Size Notice in the Preface section.
- Remove eighteen bolts (1) one bolt (2) and one bolt (3).
Caution: The torque converter housing/oil pump cover assembly dry weights are approximately
27 kg (60 lb). To help avoid personal injury and/or property damage:
• | Use caution when installing, removing, or moving the converter housing/oil pump cover assembly. |
• | Get help when lifting the converter housing/oil pump cover assembly. |
• | Assistance from a hoist or another person may be required. |
• | Make sure lifting equipment can properly support the converter housing/oil pump cover assembly. |
- Attach a sling to converter housing (1).
- Attach a hoist to the sling.
- Remove converter housing/front support module (1) from main housing (4) and turbine shaft (2).
- Place the converter housing/front support module on the work table.
- Remove the sling.
- Remove and discard main housing/separator plate gasket (3).